JOLLY- Professional phone case factory since 2010 

how to make a leather laptop sleeve

by:Jolly     2023-07-21


How to Make a Leather Laptop Sleeve

If you're looking to protect your laptop in style, then a leather laptop sleeve might be just what you need. Not only do they look great, but they also provide ample protection for your laptop. In this article, we'll walk you through the steps to make a leather laptop sleeve.

1. Gather Your Materials

Before you start making your leather laptop sleeve, you need to gather all the necessary materials. You will need:

- A piece of leather (big enough to fit your laptop)

- Scissors or a rotary cutter

- A cutting mat

- A ruler

- A leather hole punch

- A waxed thread

- A leather needle

- A diamond chisel

- A stitching awl

- A strap cutter

2. Measure and Cut the Leather

The first step in making a leather laptop sleeve is to measure and cut the leather. Lay your laptop on top of the piece of leather and add about an inch to each side. This will allow enough space for the laptop to fit comfortably inside the sleeve. Use a ruler to measure the leather and mark it with a pen. Cut the leather with scissors or a rotary cutter, using a cutting mat to protect your surface.

3. Create the Flap

Fold the top of the leather piece down and align the edges. Use a leather hole punch to create four evenly spaced holes along the edges of the flap. Thread your waxed thread onto a leather needle and sew the edges together using a saddle stitch. Knot the thread at the end of the stitch and cut off the excess. Plus, you can add some snap fasteners or pin buckles to the flap to secure the laptop inside.

4. Cut the Strap

Cut a thin strip of leather for the strap. Use a strap cutter to ensure you get an even cut. Slide the strap through the holes in the flap and sew it in place.

5. Stitch the Edges

Next, you need to stitch the edges of the leather laptop sleeve together. Mark a line around the edge of the leather, about half an inch away from the edge. Use a diamond chisel to create evenly spaced holes along the line. Thread your waxed thread onto a stitching awl and sew the edges together using a saddle stitch.

6. Finish the Edges

Finally, you need to finish the edges of the leather laptop sleeve. Use a leather edge beveler to smooth the edges and a leather burnishing tool to polish the edges. You can also choose to add some leather conditioner or butter on the surface of the laptop sleeve to make it shine.


Making a leather laptop sleeve isn't as complicated as it may seem. By following these steps, you can create a stylish and functional sleeve to protect your laptop while on the go. So, gather your materials and get started on creating your very own leather laptop sleeve today!

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...