how to make laptop sleeve
How to Make Laptop Sleeve: A Step-by-Step Guide
Laptop sleeves are a great way to protect your laptop from scratches, dust, and accidental bumps. However, they can be quite expensive, and finding the perfect fit can be a challenge. Why not make your own laptop sleeve? Not only will you save some money, but you can also customize it to your liking.
In this article, we will provide you with a step-by-step guide on how to make a laptop sleeve. No prior sewing experience is required!
Materials needed:
- Polyester felt
- Fabric scissors
- Sewing machine
- Thread
- Velcro
Step 1: Measure your laptop
The first step is to measure your laptop. Measure the height, width, and depth of your laptop. Add an extra inch to each measurement to allow for seam allowances. Write down your measurements.
Step 2: Cut your felt
Cut two pieces of felt fabric, using the measurements you took in the previous step. Make sure that the pieces are the same size. These will be the front and back panels of your laptop sleeve.
Step 3: Cut a strip of felt for the closure
Cut a strip of felt fabric that is 2 inches wide and the same length as the width of your laptop sleeve. This will be used for the closure of your sleeve.
Step 4: Sew the closure
Fold the strip of felt in half lengthwise, with the wrong sides facing each other. Sew along the long edge using a 1/4 inch seam allowance. Turn the strip right side out and press it flat. You now have a closure for your laptop sleeve.
Step 5: Attach the Velcro
Cut a 2-inch piece of Velcro and sew one half of it to the inside of one end of the closure strip. Sew the other half of the Velcro to the outside of the other end of the closure strip.
Step 6: Sew the panels together
Place the two panels of your laptop sleeve on top of each other, with the right sides facing each other. Pin the sides and bottom edges in place. Sew along the pinned edges, using a 1/4 inch seam allowance.
Step 7: Turn the sleeve right side out
Turn the laptop sleeve right side out. Press the seams flat with an iron.
Step 8: Attach the closure
Fold the closure strip in half across the width of your laptop sleeve. Pin it in place along the top edge of the sleeve, with the Velcro facing up. Sew it in place, using a 1/4 inch seam allowance.
Step 9: Customize your sleeve
You can now customize your laptop sleeve by adding decorations, such as buttons or appliques.
Conclusion
Making your own laptop sleeve is easy and fun. By following the steps outlined in this article, you can create a custom laptop sleeve that will protect your laptop and show off your personal style. So, grab your materials and start sewing!