how to sew a credit card wallet

How to Make a Credit Card Wallet: A DIY Guide to Sewing Your Own Wallet

Are you tired of always rummaging through your purse or wallet to find your credit cards? Or maybe you're looking for a creative and fun sewing project to tackle? Look no further than making your own credit card wallet!

With just a few supplies and some basic sewing skills, you can create a stylish and functional wallet to hold all of your credit cards. Here's how to get started.

Supplies Needed:

- Fabric (can be a scrap or a fat quarter)

- Fusible Interfacing

- Sewing Machine

- Thread

- Rotary Cutter or Scissors

- Ruler

- Iron and Ironing Board

- Closure (such as a snap, button, or Velcro)

Step One: Measure and Cut

Using your ruler and rotary cutter or scissors, measure and cut out your fabric pieces. You will need two pieces of main fabric that measure 4 1/2' x 7', two pieces of interfacing that measure 4 1/2' x 7', and one piece of closure material that measures 3' x 3'.

Step Two: Fuse Interfacing

Following the manufacturer's instructions, fuse the interfacing to your main fabric pieces. This will add structure and stability to your wallet.

Step Three: Sew Your Closure

Take your closure material and fold it in half, right sides together. Sew along the two sides to create a small pocket. Turn your pocket right side out and press.

Step Four: Attach Closure

Fold one of your main fabric pieces in half, right sides together, and mark the center. Place your closure pocket at this center point and pin in place. Sew around the sides and bottom of the pocket to secure it to the fabric piece.

Step Five: Sew Main Fabric Pieces Together

Place your two main fabric pieces right sides together and pin. Sew around the sides and bottom, leaving the top open.

Step Six: Turn Right Side Out and Press

Turn your wallet right side out through the opening at the top. Use your iron to press your wallet flat and create crisp edges.

Step Seven: Sew Closure

Using your closure material, sew the other half of your snap, button, or Velcro to the center of the other main fabric piece, making sure it lines up with your closure pocket.

Step Eight: Finish Your Wallet

Fold your wallet in half, right sides together, and sew along the two sides. Turn it right side out, then press again for a sleek finish.

Congratulations! You have just made your own credit card wallet.

Benefits of Making Your Own Wallet

- Cost Effective: Making your own wallet is typically less expensive than buying one from a store or designer.

- Personalization: When making your own wallet, you have the freedom to choose your own materials, colors, and patterns.

- Unique Design: Your DIY wallet will be one-of-a-kind, and you can add your own special touches like embroidery or appliqu.

- Sustainable: By making your own wallet, you are reducing your personal carbon footprint and waste by not purchasing a mass-produced product.

Conclusion

Sewing your own credit card wallet is a fun and easy project that yields a practical and stylish product. With a little creativity and skill, you can make a wallet that is uniquely yours. By making your own wallet, you can save money, personalize your design, and feel good about reducing your impact on the environment. So grab your sewing supplies and get started on your next DIY project!