how to make a plastic card wallet

How to Make a Plastic Card Wallet

Are you tired of the constant jingling of loose change and clunky wallets that weigh you down? A plastic card wallet is a sleek and minimalist option that can keep all your cards organized and easily accessible. In this article, well show you how to make a plastic card wallet that is both functional and stylish.

Materials Needed:

To make a plastic card wallet, you will need the following materials:

- Clear plastic sheet (preferably PVC or PETG)

- Scissors or a rotary cutter

- Ruler or measuring tape

- Hole punch or awl

- Snap fastener or Velcro strip

- Paper or cardboard for template

Step-by-Step Instructions:

1. Create a template:

Before starting, its a good idea to create a paper or cardboard template of the wallet. This will help you determine the size and shape of the wallet and make cutting the plastic sheet easier. You can start by measuring your cards and adding 1-2 centimeters on each side for seam allowance. A typical credit card is around 85.6 x 54 mm, so a wallet measuring 10 x 7 cm should fit most standard cards.

2. Cut the plastic sheet:

Using the template, cut out the plastic sheet to the desired size and shape. Scissors or a rotary cutter can be used for this step, but be sure to use a clean and even cut to prevent rough edges. Its important to note that if youre using a thicker plastic sheet, you may need to use a utility knife or box cutter instead.

3. Punch holes:

Using a hole punch or awl, make two holes on one side of the wallet where the snap fastener or Velcro strip will be attached. Be sure that the holes are evenly spaced and in the correct location before punching.

4. Attach fastener:

On the same side as the two holes, attach the snap fastener or Velcro strip. The fastener should be placed so that it lines up with the holes you made. Typically, snap fasteners will have two parts - one male and one female - that will snap together to keep the wallet closed. If using Velcro, make sure that the hook and loop sides are facing each other before attaching.

5. Fold and sew:

With the fastener attached, fold the plastic sheet in half lengthwise so that the snap or Velcro is on the outside. Use clips or pins to hold the two sides together, and sew the sides together using a straight stitch or a small zigzag stitch. Its important to note that if youre using a heavier plastic sheet, you may need to use a heavier needle or a specialized thread to prevent the thread from breaking.

6. Trim excess:

After sewing the sides together, trim any excess plastic from the edges with scissors or a rotary cutter. Be sure to leave a small seam allowance to prevent the edges from fraying.

7. Finish:

Once the excess plastic is trimmed, your plastic card wallet is complete! You can now fill it with your credit cards, ID cards, and any other cards you need to keep organized.

Tips and Tricks:

- If youre having trouble cutting the plastic sheet, try using a template or guide to help you achieve a clean and even cut. You could also try using a tool like a rotary cutter or utility knife for more precision.

- To prevent the plastic sheet from slipping while youre sewing, try using clips or pins to hold the two sides together. You could also try using a specialized sewing machine foot or a non-stick presser foot for more control.

- If youre using a thicker plastic sheet, you may want to invest in an industrial sewing machine or hire a professional to sew the wallet for you. This will ensure that the stitching is strong enough to hold the plastic together without breaking.

Conclusion:

Making a plastic card wallet is a fun and easy project that can be completed in just a few hours. With the right materials and a little bit of sewing know-how, you can create a stylish and functional wallet that will keep your cards organized and easily accessible. So what are you waiting for? Grab some plastic sheet, a needle and thread, and get sewing!