JOLLY- Professional phone case factory since 2010 

how to remove links from a watch band

by:Jolly     2023-08-07


Watches are an essential accessory for both men and women. They not only help you to keep time but also serve as a fashion statement. Watch bands, on the other hand, are available in different sizes to ensure they fit the wrists of all individuals. However, even with the best sizing, you may find that your watch band has links that are too long, and you need to remove them to adjust the band's size, especially if the band is too loose. In this article, we will explore how to remove links from a watch band.

The steps on how to remove links from a watch band are quite simple and easy to follow. Before you start, though, you will need a few tools to aid in the process:

1. Pin remover tool

2. Small hammer or mallet

3. Soft cloth or tissue

4. Pliers

With these tools in hand, let's proceed to the steps for removing watch links.

Step 1: Determine the number of links to remove

The first step is to determine how many links you need to remove. Try on the watch and see how many links you need to remove to adjust the watch size to fit your wrist comfortably. Remember, when removing links, you need to remove them from both sides of the watch band to ensure that the clasp remains in the center.

Step 2: Locate the tiny arrows

Most watch bands have small arrows that show the direction in which the links are attached. The arrows are a guide that helps you to know the sequence in which you should remove the links. Some watch bands may not have arrows, but they will have tiny screws or pins holding the links together.

Step 3: Position the watch on a soft cloth or tissue

It is essential to lay the watch on a soft cloth or tissue, especially if the watch has a delicate finish, to avoid damaging the watch. This step will also prevent the watch from slipping or moving during the removal process.

Step 4: Remove the pins

Using the pin remover tool, push the small pins out of the links slowly. Ensure that you do not use excessive force, as this may damage the watch or bend the pins. If you are finding it difficult to remove the pins, you can use a small hammer or mallet to tap gently on the pin remover tool to push the pins out.

Step 5: Remove the desired number of links

After removing the pins, you can pull the unwanted links apart and remove them from the watch band. Remember to remove an equal number of links from each side of the band to keep the watch clasp centered. Keep the removed links safely in case you need to put them back.

Step 6: Reconnect the watch band

Now that you have removed the unwanted links, you need to reconnect the watch band. Insert the pins back into the watch band links by pushing them in the opposite direction of the arrow. You may need to use pliers to push the pins in gently and ensure that they are flush with the links.

Step 7: Try on the watch

After reconnecting the watch band, try on the watch to confirm whether it fits your wrist correctly. If the watch is still too loose, you can repeat the process and remove more links. If it feels too tight, you can add one or two links to the watch band.


Removing links from a watch band is an easy process that you can do at home with the right tools and guidance. It is essential to follow the steps above to avoid damaging the watch during the process. Additionally, you can take the watch to a professional jeweler to make the adjustments for you if you don't feel confident doing it yourself. With a well-fitting watch band, you can comfortably keep time and make a fashion statement.

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...